How Do You Manage The Kernel? Missing, Missing

Speed up your PC in just a few clicks

  • 1. Download and install ASR Pro
  • 2. Open the application and click on the Scan button
  • 3. Select the files or folders you want to restore and click on the Restore button
  • Download this software now and say goodbye to your computer problems.

    Recently, some users have encountered an error message regarding a missing kernel. This problem can arise for several reasons. We will talk about this below. Most likely, you are experiencing file system and / or physical disk corruption and your current kernel files cannot be recovered. Check the hard drive for errors and fix them (CHKDSK and hard drive manufacturer’s utilities). Then, if the utilities find that the drive cannot be repaired, replace it (and rebuild using “Add To” or “Reinstall”).

    Output error 0xc0000221 occurs for some Windows 11/10 users right after the computer fails to start. Some have reported that users are stuck in an endless auto-repair loop with this error code. In this method article, we will expose the possible causes and then suggest solutions to fix the problem.

    The error message filled in with ezah = “90” for this error system can be seen below –

    Your computer needs repair.

    The operating configuration could not be loaded because the kernel is often missing or contains errors.

    File: WINDOWS system32 ntoskrnl.exe

    kernel is missing

    Error code: 0xc0000221.

    Possible causes

    After examining the problem and demonstrating the various symptoms of this process error, we narrowed down its causes to four, each of which can cause error codes 0xc0000221, as described below.:

    1. Hardware Issue Caused by Innovative RAM or Hard Drive: There may well be reports of cases where users are better off getting this error right after installing a second memory stick that could plug in a new slave hard drive.
    2. Secondary GPU: The issue sometimes occurs on machines with SLI or possibly CrossFire. Consequently, the power supply cannot provide enough power to power all connected devices.
    3. Corrupted system documentation: The error code indicates a system problem with file corruption.
    4. The charm of a third party service is the beginning: events were reported where a bug was caused by a rogue third party service.

    We have provided several troubleshooting steps to help owners resolve error code 0xc0000221. Below is a set of promising fixes that may help you successfully resolve the issue. We often recommend that you try fixes in the order in which they are presented.

    1. Boot into free In a dangerous mode.
    2. Run SFC, CHKDSK and DISM in scan order.
    3. Check your RAM for problems.
    4. Remove alternate GPUs and external hard drives / SSDs.
    5. Perform a system restore.
    6. Perform a recovery installation of Windows 10.

    IMPORTANT! Regardless of the reason, the person’s priority should be to use Safe Mode. If you can get into Safe Mode, so much the better; Otherwise, the person will have to use their own Windows installation media, Boot

    1) In Safe Mode

    In Safe Mode, your computer can only start in a limited state, as the startup process only requires the main files and tabs. If your computer starts up in safe mode without any problems, this problem is most likely caused by a little software that you have previously installed.

    Here’s what you need to do to fix this error after starting the mode correctly:

    If you were unable to get out of between From the original screen, you can force the Advanced Boot Options screen to open by suppressing startup (turn on your computer, shut it down when the Windows logo appears. Repeat this) 2 or 3 times, always reconnecting to Off when your current Windows logo is displayed) Boot process.

    If you’re ready to complete the boot process, your family can also open the Recovery tab in Settings by opening the Run dialog (Windows Key + R) and typing ms-settings: recovery and clicking Login. Then just click Restart under the Advanced Startup button.

    When you get to the Advanced Boot Options screen, select Troubleshoot and then just select Advanced Options.

    What does error code 0xC0000221 mean?

    The STATUS_IMAGE_CHECKSUM_MISMATCH check failed with the value 0xC0000221. This indicates that a great system driver or DLL has been corrupted. This topic is for programmers. If the audience is a customer who heard a blue screen error code while using the computer, see the “Troubleshoot yellow screen errors” section.

    When you receive ezah = “90”, the launch options are displayed again. Press F4, F5, or F6 to start with people from the three safe modes available.

    If your computer starts successfully in Safe Mode, it’s safe to say that any diagnostics is a service of an application you recently installed that often calls you about ibku. In solving this problem, you can start by removing recently deployed programs that you think are causing the problem, or you can try to systematically exclude programs and services from the startup process until you find the root culprit.

    How do I fix a corrupted kernel?

    Reset the drivers for your design card.Update your device drivers.Repair malicious system files.Resolve any software conflicts.Solve all hardware problems.Reinstall your Windows system.

    But if you get exactly the same error 0xc0000221 when booting in Safe Proceed mode, please do as follows.

    2) Perform SFC, CHKDSK And DISM Scans In That Order

    By running the three main built-in utilities designed to repair corrupted Windows files, you can eliminate the possibility that 0xc0000221 does not match all error codes to actually damage the system file or file program / p>

    Here’s how you can use these utilities to fix this startup error:

    You are running the System File Checker. If you are unable to get through the splash screen, follow the steps above to open the Advanced Boot Options menu, then try running Troubleshoot> Advanced Options> Command Prompt. Then enter the following com In addition to Enter to start a file system check.

     sfc / scannow 

    How do I fix a missing kernel file?

    We immediately start in safe mode.Perform SFC, CHKDSK scan i.e. DISM scan in the order shown.Check about Working memory for problems.Remove the secondary GPU and hard drives / SSDs.Perform a system restore.Perform a repair installation of the Windows Ten operating system.

    After executing the sfc / scannow methods, restart your computer and see if the error persists. If this still happens, bring back an elevated command prompt as shown above and type, say, and press Enter to run CHKDSK:

    Speed up your PC in just a few clicks

    Is your computer running slow and unstable? Are you plagued by mysterious errors, and worried about data loss or hardware failure? Then you need ASR Pro the ultimate software for repairing Windows problems. With ASR Pro, you can fix a wide range of issues in just a few clicks, including the dreaded Blue Screen of Death. The application also detects crashing applications and files, so you can quickly resolve their problems. And best of all, its completely free! So dont wait download ASR Pro now and enjoy a smooth, stable and error-free PC experience.


     chkdsk / f C: 

    Note. If your Windows 10 installation is literally not C, change the letter accordingly in the instructions above.

    When the method completes, restart. And the PC sees it whenever you step outside the international screen. If the same error persists, return to an elevated command prompt as above, copy and paste the following command and run it in Enter to run a DISM scan:

     dis / online / cleanup-image / restorehealth 

    After completing this process, restart your computer and check if it starts without errors. Still not fixed, you can be sure of the next solution.

    3) Check If RAM Is Reserved For Troubleshooting

    You can check if there isin your installed RAM of the modules causing this error. To do this, all you have to do is open the entire computer and one of the specific modules (if you are using two RAM modules). If your computer starts up with only one RAM card, try swapping not one but two RAM cards – sometimes problems arise when you run into the fastest memory located behind memory.

    You can also run MemTest on both RAM keys. If you acknowledge that your RAM modules are not causing this error now, you can move on to the next fix.

    4) Remove Additional GPU And External Hard Drives / SSDs

    Here you just share all the peripherals that can be avoided: extra hard drive, external hard drive, DVD optical drive, second SLI GPU (or CrossFire setup), non-critical add-ons. After you have reduced your computer to the minimum, turn on your real computer and see if it starts successfully withtatya. If it starts without error code 0xc0000221, always reconnect non-essential components until you outlive the culprit.

    If that doesn’t work, move on to the next fix.

    5) Perform A System Restore

    This issue may appear immediately after installing a Windows update. In this case, System Restore might fix the problem.

    If the person did not perform a proper system restore or the procedure failed, you can proceed to the next troubleshooting.

    6) Replace Windows 10 Installation

    If you are still unable to resolve error 0xc0000221 at this point, you can fix Windows 10 yourself. This will preserve your personal archives, settings and applications.

    kernel is missing

    Download this software now and say goodbye to your computer problems.

    Kernel Fehlt
    Falta El Kernel
    Kernel Esta Faltando
    Brakuje Jadra
    커널이 없습니다
    Kernel Ontbreekt
    Le Noyau Est Manquant
    Yadro Otsutstvuet
    Karnan Saknas